|
Num
|
Ad Subject
|
Photo
|
| 1 |
Diplomat Body Parts, Fenders, Grill |
Yes |
| |
These are used front feaders and headlight/grill (header) assemblies for the mid 1980's Diplomat and LeBaron cars. Stored inside and priced
|
| 2 |
Pickup Topper |
--- |
| |
This is a used pickup topper that came off a 1974 GMC long box pickup. Good glass.
|
| 3 |
Ford 360 V-8 Core |
Yes |
| |
This Ford 360 V-8 engine was running when taken out of the F-250 pickup. As a pickup engine, it is a
|
| 4 |
Kawasaki KLX 250 Motorcycle |
Yes |
| |
This is about a 1978? Kawasaki KLX250 motorcycle. The serial number is LX250A-001108. It has front and rear drum brakes and
|
| 5 |
60 Foot Antenna Tower |
Yes |
| |
This is a used Vig-To model V-4 antenna tower. The tower has 4 sections approximately 20 feet tall and fully extends
|
| 6 |
Linseed Oil |
--- |
| |
Linseed Oil - 50 gallons in factory sealed 5 gallon cans.
|
| 7 |
American Standard Soaker Tub |
Yes |
| |
This used American Standard Soaker Tub is in excellent condition. It is a relatively long cast iron tub that fits into
|
| 8 |
Wedco Steam Cleaner |
Yes |
| |
Wedco Steam Cleaner includes hose, wand and propane regulator
|
| 9 |
Tpt #4303 Power Pipe Cutter |
--- |
| |
Used TPT #4303 power pipe cutter
|
| 10 |
Beaver Mdl: 61e Pipe Threader |
--- |
| |
Used Beaver 61E adjustable pipe threader head, uses Toohenge dies.
|
| 11 |
Ingersol Rand 1/2 Inch Air Impact Wrench |
Yes |
| |
This is an older, used Ingersol Rand 1/2 inch drive air impact wrench. It is in good working condition. This size
|
| 12 |
Ingersol Rand 1/2 Inch Pneumatic Wrench |
Yes |
| |
This is a used Ingersol Rand 1/2 inch drive air impact wrench. It is in good working condition. This size wrench
|
| 13 |
Rockwell 1/2 Inch Pnuematic Wrench |
Yes |
| |
This is a used Rockwell 1/2 inch drive air impact wrench. It is in good working condition. This size wrench is
|
| 14 |
Ingersol Rand 1 Inch Pneumatic Wrench |
Yes |
| |
This is an older, used one inch drive Ingersol Rand Pneumatic impact wrench in very good condition. Excellent air wrench for
|
| 15 |
Chicago Pneumatic 1 Inch Impact Wrench |
Yes |
| |
This is a used one inch drive Chicago Pneumatic impact wrench in very good condition. Excellent air wrench for removing tractor
|
| 16 |
Chicago Pneumatic 3/4 Inch Impact Wrench |
Yes |
| |
This is a used Chicago Pneumatic 3/4 inch drive air impact wrench.
|
| 17 |
Kawasaki 3/4 Inch Air Impact Wrench |
Yes |
| |
This is a used Kawasaki Model KPT-220R pneumatic (air) impact wrench with a 3/4 inch drive.
|
| 18 |
Craftsman Chipper/shredder Yard Vac |
Yes |
| |
We purchased this Craftsman Chipper/Shredder Yard Vac and used it for vacuuming up leaves and chipping limbs for about 2 falls.
|
| 19 |
Sears Air Compressor |
Yes |
| |
This is a Sears air compressor with the following features: - 20 gallon air tank - 1.5 horse power 120 volt single phase
|
| 20 |
Spicer Brownline "brownie" Transmission |
Yes |
| |
This is a medium sized Spicer Brownline auxiliary transmission or Brownie. Manufacter Plate Information: - Serial No. 67890 - B/M 3424-8 - Model: 6231B Dimensions: - Overall
|
| 21 |
Caterpillar D7 Cable Dozer |
Yes |
| |
This is a used Caterpillar D7 cralwer with a cable operated dozer. - Engine serial number 3T1183 - Tractor serial number 6T921 - Cable
|
| 22 |
Caterpillar D7 W/ Letourneau Dozer |
Yes |
| |
This is a used Caterpillar D7 cralwer with a LeTourneau cable operated dozer. - Engine and tractor serial numbers match SN 4T5718 -
|
| 23 |
Melroe Rr 8 Bottom Oneway Plow |
Yes |
| |
This is a Melroe 8 bottom oneway plow with 16 inch spacing. It is in excellent mechanical condition and is complete
|
| 24 |
Trojan Backhoe Attachment |
Yes |
| |
This is a Trojan backhoe attachment and "quick" mount. Cat D4D crawler _NOT_ included. - Backhoe reach 16' 6" (198 inches) tip
|
| 25 |
John Deere Wheel Centers |
Yes |
| |
This is a pair of used John Deere wheel centers. Originally, they mounted a 24.5-32 rear tractor tire rim onto a
|
| 26 |
Various Small Farm Trailers |
--- |
| |
Various small, used farm trailers, priced each.
|
| 27 |
Firestone 10 Hole Wheel "new" |
--- |
| |
This is a Firestone brand "Extra Service" 10 Hole Budd Wheel. It is a tubeless type and is sized 22 x
|
| 28 |
"New" Goodyear Dayton Rim |
--- |
| |
This is a new old stock Goodyear brand "Precision" Dayton style rim. The rim is a tube type, size 22 x
|
| 29 |
Dodge 413 V-8 Core |
Yes |
| |
This engine was not running when taken out of a Dodge medium duty dump truck. It stopped running and does not
|
| 30 |
Spicer-Brownline "brownie" Transmission |
Yes |
| |
This is a larger sized Spicer Brownline auxiliary transmission or Brownie. Missing Manufacturer Plate, Gearbox Top Cover Casting Numbers: - BI3-8 - C70-16-6-1 - Model:
|
| 31 |
1959 Ford F600 Truck |
--- |
| |
This is a used 1959 Ford F600 Truck with the following features: - Original Red and White paint - 292 Ford V-8 engine -
|
| 32 |
Steel Wheel Wagon Axles |
Yes |
| |
This is a pair of wagon axles with steel wheels. The smaller set would go under the front of the wagon
|
| 33 |
Heil Heiloader Tailgate Lift |
Yes |
| |
This is a used Heil tailgate lift.
|
| 34 |
Overhead Truck Beam Crane |
Yes |
| |
This is a shop built overhead beam crane for a medium duty truck with a 12ft bed. Was originally used for
|
| 35 |
Iron Wheeled Wagon Frame |
Yes |
| |
This is a wooden framed wagon frame with spoked iron wheels. Currently set up as a pole trailer.
|
| 36 |
Wooden Wagons With Wheels |
Yes |
| |
These are two very old wooden wagons with wheels. Priced $500 for each wagon. Steel wheels/axles are separate item. The wagons
|
| 37 |
1958 Allis Chalmers Model B Tractor |
Yes |
| |
This Allis Chalmers B tractor was here when we purchased the ranch in 1958. We used it for irrigating and pullling
|
| 38 |
35,000 Gallon Steel Tanks |
Yes |
| |
We were told these tanks were manufactured as diesel fuel tanks in Butte, installed at the concentrator in Anaconda, and the
|
| 39 |
Wooden Wagon Wheels |
Yes |
| |
There are 2 large and 1 medium wooden wagon wheels for sale. They are in good shape for their age and
|
| 40 |
John Deere Single Disc Grain Drill Openers |
Yes |
| |
These are used John Deere single disc grain drill opener assemblies. The number on the casting is: A634M The assemblies include: - Single
|
| 41 |
Farmhand Wheel Rake Parts |
Yes |
| |
We have the following parts available for a Farmhand wheel rake: 1 main frame for 3 wheels 3 wheel rake frames (no teeth
|
| 42 |
Pickup Stock Rack |
Yes |
| |
This is a shop built wooden stock rack for a short box smooth side (not step side) pickup. The sides are
|
| 43 |
Antique Stable Cart |
Yes |
| |
This is a very old stable cart. It has the fine spoked wooden buggy wheels. Would look very nice holding flowers
|
| 44 |
Danuser F2 9 Inch Auger |
Yes |
| |
This is a used Danuser model F2 post hole auger. It is a 3 point mount, Cat I, I think and
|
| 45 |
Eversman 3yd Hyd. Scraper |
Yes |
| |
This is an Eversman 3 yard capacity, hydraulically operated scraper or carryall. It was used around the ranch for building road,
|
| 46 |
John Deere 5020 Parts Tractor |
Yes |
| |
This John Deere 5020 is a 2 wheel drive tractor with the following features: - 1000 rpm PTO - dual hydraulic remotes - Syncro-Shift
|
| 47 |
John Deere 5010 Tractor |
Yes |
| |
This John Deere 5010 is a 2 wheel drive tractor with the following features: - 1000 rpm PTO - dual hydraulic remotes - Syncro-Shift
|
| 48 |
John Deere 5010/20 Tractor |
Yes |
| |
This John Deere 5010 is a 2 wheel drive tractor updated with the 5020 series engine. I believe the big difference between the 10 and 20 series was the engine. This tractor has the following features: - 3 point hitch - 1000 rpm
|
| 49 |
John Deere 5020 Tractor |
Yes |
| |
This John Deere 5020 is a 2 wheel drive tractor with the following features: - 3 point hitch - 1000 rpm PTO - adjustable
|
| 50 |
Powder River Style Head Catch |
Yes |
| |
This is an older, shop built Powder River style head catch. It works left. Useful where you need a head catch
|
| 51 |
Dayton 5th Wheel - Used |
Yes |
| |
This is a used, fixed Dayton 5th wheel for use with a semi tractor/trailer. Looks in good, usable condition. Please look
|
| 52 |
Custom Built Palpitation Cage, Heavy Duty |
Yes |
| |
This is a shop-built, custom made palpitation cage with the following features: - The cage is for a left hand working system -
|
| 53 |
Assorted Work Horse Harness |
Yes |
| |
Assorted work horse harness including reins, harness and bridles/halters. This is a separate listing from the horse collars.
|
| 54 |
Work Horse Collars |
Yes |
| |
These are old work horse collars. Note that these are not the fancy show or parade collars with chrome, nickel and/or
|
| 55 |
New Horseshoes, #3 "rock" |
Yes |
| |
These are #3 size heavy duty "rock" type horseshoes. They are unfinished and unpunched. These are very hard to find. There
|
| 56 |
New Horseshoes, #2 "rock" |
Yes |
| |
These are #2 size heavy duty "rock" type horseshoes. These are very hard to find. They are unfinished and unpunched. There
|
